Canon imageCLASS MF6540 Basic Operation Manual page 254

SYSTEM SETTINGS
7. USE HTTP
8. SET IP ADD RANGE
OFF
ON
1. PERMIT/
REJECT
2. SET IP
ADDRESS
9. RX MAC ADD SET.
OFF
ON
Sets whether to activate HTTP (HyperText Transfer Protocol) for
the Remote UI.
ON (PORT NO.)
–
– OFF
Sets whether to restrict the range of IP addresses.
Disables restriction of IP address of computers.
Enables restriction of IP address of computers from which data
(print/fax jobs) can be sent to the machine.
Selects whether to permit or reject access from a specified IP
address.
REJECT
–
– PERMIT
Specifies the IP address range. <START IP ADDRESS> and <END
IP ADDRESS> must be entered for each setting.
– 1. IP ADDRESS 1
– 2. IP ADDRESS 2
– 3. IP ADDRESS 3
– 4. IP ADDRESS 4
Sets whether to activate a MAC address filter.
Disables MAC address filter.
Specifies a MAC address filter to access. MAC address must be
entered for each setting.
– 1. PERMIT RX ADD1
– 2. PERMIT RX ADD2
– 3. PERMIT RX ADD3
– 4. PERMIT RX ADD4
– 5. PERMIT RX ADD5
12-29