ADJUST./CLEANING
Setting Item
1. TRANS. ROLR CLEAN
2. FIX.UNIT CLEANING
3. FEEDER CLEANING
4. SPECIAL MODE M
MID
LOW
HIGH
5. SPECIAL MODE N
6. SPECIAL MODE O
7. SPECIAL MODE P
12-24
Cleans the transcription roller. (See "Transcription Roller," on
p. 10-11.)
Cleans the fuser roller. (See "Fuser Roller," on p. 10-6.)
Cleans the ADF. (See "Cleaning the ADF Automatically," on
p. 10-10.)
Sets to improve print quality or fix irregular print density. If print
quality decreases or an irregularity in the print density appears,
transcription output may not function adequately.
Selects in normal conditions.
Selects to compensate for poor print quality that occurs when
using paper that was stored for a long time at high temperatures
and high humidity.
Selects to compensate for poor quality that occurs when using
heavyweight paper.
When the two-sided printing function is used, paper may curl
severely or become jammed. Enable this setting to prevent
paper curling or jamming.
–
OFF
–
ON
This setting is not functional in this model.
Sets to activate when lightweight paper or paper which is easy
to get uneven print density is used for printing.
OFF
–
–
ON
Description