Canon imageCLASS MF6540 Basic Operation Manual page 256

SYSTEM SETTINGS
5. VIEW IP ADDRESS
1. IP ADDRESS
2. SUBNET MASK
3. GATEWAY ADDRESS
6. STARTUP TIME SET.
3. COMMUNICATIONS*
1. TX START SPEED
2. RX START SPEED
3. MEMORY LOCK
OFF
ON
1. PASSWORD
2. REPORT PRINT
3. MEMORY RX TIME
OFF
ON
1. MEM RX START
TIME
2. MEM. RX END
TIME
Checks the current network settings.
Checks the IP address.
Checks the subnet mask.
Checks the gateway address.
Sets the time period required to delay the startup of network
communications for the machine. (0–300 SEC) (0 SEC)
Sets the facsimile communication.
Sets the transmission speed for all sent documents.
(33600 bps, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 14400 bps)
Sets the transmission speed for all receivable documents.
(33600 bps, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 14400 bps)
Sets whether to receive and store all documents in memory
and not to print automatically. (See Chapter 4, "Sending and
Receiving (MF6595cx/MF6595/MF6590 Only)," in the Reference
Guide.)
Disables memory reception.
Enables memory reception.
Registers the password that protects the authority for accessing
to memory.
Sets whether to print a report on memory reception.
– OFF
– ON
Sets whether to set a period for memory reception.
Disables setting a period of memory reception.
Enables setting a period of memory reception.
Enters the start time.
Enters the end time.
12-31