Canon imageCLASS MF6540 Basic Operation Manual page 247

PRINTER SETTINGS
7. CUSTOM PAPER
OFF
ON
1. UNIT OF
MEASURE
2. X DIMENSION
3. Y DIMENSION
8. APPEND CR TO LF
NO
YES
9. ENLARGE A4
OFF
ON
11. RESET PRINTER
*** MF6595cx/MF6595 only
12-22
Sets whether to use a custom paper size.
Disables you to specify a custom paper size.
Enables you to specify a custom paper size.
Selects the unit of measurement to specify a custom paper size.
INCHES
–
– MILLIMETERS
Specifies the horizontal size of the custom paper.
(05.00–14.00 inches (127–356 mm)) (14.00)
Specifies the vertical size of the custom paper.
(03.00–08.50 inches (76–216 mm)) (08.50)
Sets whether to append a carriage return (CR) when line feed
code (LF) is received.
The print head moves down to the next line when line feed
code is received, and the margin does not change (such as the
beginning of the next line).
The print head moves to the beginning of the next line when
line feed code is received.
Sets whether to expand the printable area of A4 size paper to
that of Letter size in width.
* This setting is applicable for A4 paper and portrait orientation for the
PCL5 printing only. The PCL6 printing is not supported.
All the area on a page 1/8 inch (4.23 mm) from the top, bottom,
left, and right edges is available for printing on A4 paper.
All the area on a page 1/8 inch (4.23 mm) from the top and
bottom edges and 1/8 inch (1.28 mm) from the left and right
edges is available for printing on A4 paper. Only the width
increases.
Clears all print jobs in progress and resets the printer function.
OFF
–
– ON