Canon imageCLASS MF6540 Basic Operation Manual page 239

FAX SETTINGS (MF6595cx/MF6595/MF6590 Only)
3. TX SETTINGS
1. ECM TX
2. PAUSE TIME
3. AUTO REDIAL
ON
1. REDIAL TIMES
2. REDIAL INTERVAL
3. TX ERROR REDIAL
OFF
4. TIME OUT
5. DIALING LINE CHCK
12-14
Sets the transmission functions.
Sets whether the ECM (Error Correction Mode) transmission is
activated.
ON
–
– OFF
Sets the pause time when you insert pause into the dialing
sequence. (1SEC–15SEC)(2SEC)
Sets whether to redial automatically when the other line is busy
or a transmission error occurs. (See Chapter 4, "Sending and
Receiving (MF6595cx/MF6595/MF6590 Only)," in the Reference
Guide.)
Customizes the redial operation.
Sets the number of retries. (1TIMES–10TIMES)(2TIMES)
Sets period of time before redialing. (2MIN.-99MIN.)(2MIN.)
Sets whether the machine redials automatically when
transmission error occurs.
ON
–
– OFF
After the first attempt at dialing fails, redialing is not attempted.
Sets whether to scan a document automatically after entering
the fax number.
* This function is not available when you dial with the numeric keys.
ON
–
– OFF
Sets whether to check the telephone line condition.
– OFF
– ON