Photon Focus MV4 Series User Manual page 56

7 Encoder
Rising Edge Encoder starts with the rising edge on the selected line input.
Falling Edge Encoder starts with the falling edge on the selected line input
Both Edges Encoder starts with any edge on the selected line input
Level High Resets the encoder as long as the level is high. The encoder remains in reset state
until the level is low again.
Level Low Resets the encoder as long as the level is low. The encoder remains in reset state
until the level is high again.
Activation configuration has only effect when line input is selected as an encoder
reset source, otherwise this configuration is ignored.
56 of 143
MAN093 08/2021 V1.1