Restore Factory Setting; Reveal Software Version Number - Inateck BCST-55 Instruction Manual

Enter Setup

Restore Factory Setting

You may use the "Restore Factory Setting" under the circumstances below:
1. Wrong configuration on the barcode scanner or failure to read barcodes.
2. Previous settings are forgotten while users do not want them to affect future barcode
scanning.
3. To restore to initial setting after the use of some rarely used configuration.
Scan the "Enter Setup" - "Restore Factory Setting" barcodes in turn. There is no need to read
the "Exit and Save" barcode.
Note:If you have restored factory settings for the barcode scanner, the data stored under
inventory mode will be cleared.
Restore Factory Setting

Reveal Software Version Number

Scan the barcode "Enter Setup" - "Reveal Software Version Number". The software version
number will be output to the device connected with the BCST-55.
The "Reveal Software Version Number" function is a kind of setting, so you need to scan the
"Exit and Save" barcode after getting the software version number revealed.
Reveal Software Version Number
Exit and Save
8