Write To Custom Defaults; Restore Factory Setting - Inateck BCST-43 Instruction Manual

Japanese Keyboard (Roman Character)

Write to Custom Defaults

You may change factory defaults and customize some functions suitable for your
own applications when using your scanner. You need to scan 'Enter Setup' →
'Function setup barcode you want to customize (e.g.: Output Code ID)' →"Write
to Custom Defaults" in turn.
If you have reconfigured the scanner and want to restore to its custom setting
mode, you may scan the "Enter Setup" - "Restore to Custom Defaults" barcodes
as below. The barcode scanner will exit the setup mode after restoring to custom
defaults.
Write to Custom Defaults

Restore Factory Setting

You may use the "Restore Factory Setting" under the circumstances below:
1. Wrong configuration on the barcode scanner or failure to read barcodes.
2. Previous settings are forgotten while users do not want them to affect future
barcode scanning.
3. To restore to initial setting after the use of some rarely used configuration.
Scan the "Enter Setup" - "Restore Factory Setting" barcodes in turn. There is no
need to read the "Exit and Save" barcode.
Enter Setup
Canadian Keyboard
Serbian Keyboard
Restore to Custom Defaults
Exit and Save
8