Mode Of Recognition Only For Barcodes With Additional Code; Separation Character - Inateck BCST-55 Instruction Manual

Enter Setup
5-digit Additional Code
You may decide whether to recognize the 5-digit additional code by setting this function
which is applicable to EAN-8, EAN-13, ISBN, ISSN, UPC-A and UPC-E. The scanner defaults
disabling the recognition of 5-digit additional code.
Enable 5-digit Additional Code (*) Disable 5-digit Additional Code

Mode of Recognition Only for Barcodes with Additional Code

The scanner can only recognize the barcodes with additional code if you set the mode as
"Recognition Only for Barcodes with Additional Code".
The scanner can recognize the barcodes without additional code if you set the mode as
"Recognition Not Only for Barcodes with Additional Code".
Recognition Only for Barcodes with (*)Recognition Not Only for Barcodes with
Additional Code Additional Code

Separation Character

You may decide whether to add a separation character "-" between the main code and
additional code. This function is applicable to the barcodes with additional code, e.g., ISBN
code, and ISSN code.
Add Separation Character (*) Do not Add Separation Character
Exit and Save
45