Buffer Settings - Inateck BCST-55 Instruction Manual

Enter Setup

Buffer Settings

When the scanner is out of the transmission range, the barcodes scanned will be kept in the
built-in memory/buffer/cache temporarily.
If you want to upload the data stored in the built-in memory/buffer/cache to your computer
or phone, please double-click the scan button when the barcode scanner is in the
transmission range.
You may choose whether to erase the barcodes stored in the buffer every time you power
on the scanner.
Enable Auto Buffer Storage Clearance (*) Disable Auto Buffer Storage Clearance
If you want to auto-upload the barcodes that exist in the buffer when the barcode scanner
reconnects to the device, you may set the"Auto Upload Barcodes in Buffer"function as
enabled.
Enable Auto Upload Barcodes in Buffer (*) Disable Auto Upload Barcodes in Buffer
Exit and Save
11