Racelogic Performance Box Touch V1 Quick Start Manual page 9

11. Take the vehicle outside and wait for the Performance Box Touch to gain satellite lock. The
should display as solid green
.
Note: The first time that the unit is used, it may take up to 10 – 15 minutes to fully acquire satellites. After this, it
will usually take 1 – 2 minutes to acquire satellites.
12. The unit is now ready to display live Decel Test results.
13. By default, Performance Box Touch will automatically start recording when travelling over 0.5 km/h, this can be
changed within the
14. Tapping on the SD Card Icon
will manually start or stop logging data, overriding the
15. The Record Icon
will show when the unit is logging data to the SD card.
If you have come to a stop, but the Record Icon is still on, press the SD Card Icon to stop the logging before
removing the card.
Sometimes, due to poor satellite visibility in a garage or close to a building, the box may start recording, even if the
car is stationary. Always check the Record Icon before ejecting the card.
IMPORTANT – The SD card shouldn't be removed when the Record Icon is on as you may lose data.
Note: If for some reason the SD card is removed whilst still recording, it may need to be repaired using a PC
before it can be reused.
General Settings.
when green
Configured Logging Strategy.
Satellite Icon
9