Racelogic Performance Box Touch V1 Quick Start Manual page 5

If you have an SD card that is formatted in the exFAT or NTFS file formats, you will have to reformat it to a
FAT32 file system before it will work with a Performance Box Touch unit.
SDHC cards (2 GB to 32 GB)
Supplied or purchased SDHC cards are formatted in the FAT32 file format. This format
supported by Performance Box Touch.
SDXC cards (64 GB and above)
Purchased SDXC cards will be formatted in exFAT or NTFS file formats; these formats
Performance Box Touch. Please reformat as per the instructions below.
SD Card Reformatting
• FAT32 reformatting for media with sizes up to 32 GB can be done directly in Windows by right-clicking on the
media and selecting 'Format'.
• If you would like to format media with sizes above 32 GB into a FAT32 file system, you cannot do it directly in
Windows as it is not the standard formatting for the file. However, there are many third-party software programs
you can use to reformat media so that they will work correctly with our products - we recommend
a free option from the SD card organisation.
Logged Channels
Performance Box Touch logs channels to a
• Satellites: This is the number of satellites in use.
• Time: This is UTC time since midnight in the form HHMMSS.SS.
• Latitude: Latitude in minutes MMMM.MMMMMMMM +ve = North e.g. 3169.30644410M = 52D, 49M, 18.4S.
• Longitude: Longitude in minutes MMMMM.MMMMMMMM +ve = West e.g. 00040.18164742M = 00D, 40M,
10.9S.
• Velocity: Velocity in km/h.
• Heading: Heading in degrees with respect to North.
• Height: Height above sea level in meters based on the
.vbo file on an inserted SD card. The channel information is as follows:
model of the earth
is
are not supported
This Tool
used by thye VBOX GNSS engines.
by
as
5