Removal Instructions For Oil Separators - Samsung AM080FX A Series Service Manual

Disassembly and Reassembly
3-2 Disassembly and Reassembly (cont.)

3-2-9 Removal Instructions for Oil Separators

No.
8 - Two Oil Separators are mounted as a single assembly.
- To remove the Oil Separators, first you must separate
the six welded joints.
- Before separating the welded joints, cut out the
two cable ties on the RubberMHolder fixing the pipe
and then separate the Rubber Holder.
- Use a torch to heat and separate the six welded joints.
- Unfasten the screw on each of the two clamps fixing the
other pipes.
Samsung Electronics
Work Procedure Remark
Cable tie cutting
Rubber Holder
Refrigerant
discharge port
Refrigerant
suction port
Oil Return Pipe
116