Maintenance Of The Carousel - Teledyne CP Series User Manual

User Manual
CP Series
Version 3.1 – June 2020
3.1.4 M
AINTENANCE OF THE CAROUSEL
In case of seizure of the carousel, clean it with compressed air to blow the dust that may have entered.
Warning: You shouldn't, in any case, use any lubricant of any kind. The parts used for the carousel had
been permanently impregnated with lubricant. Adding some lubricant will cause the dust to stick on the
parts and will create additional damages.
Custom diaphragm
By standard, a 480x100@700mm film shape is provided. This will
reduce the shape of the X-ray beam to match the used film and
consequently reduce the leakage radiation.
Custom shapes with different sizes can be ordered from ICM to
match your application.
Beryllium window
A full open position without aluminum filter for use at low kV
settings. Exposure above 50 kV are not allowed in this position. A
warming message will be displayed on the PowerBox.
Laser pointer
A red laser light will be emitted from the center of the laser pointer.
CAUTION: on CP300D, the laser turns on automatically when on
position. Avoid direct exposition with the eyes.
For CP160-200-225D press the button for more than 1 second. The
laser will automatically shut down after 20 seconds or when the red
button is pressed again.
The laser pointer can be used to align the generator to target the
area under inspection.
18