About The Adjustment Of Guide Display On/Off Setting And Adjustment Of Caution Display Location; Side Camera Operation; About The Adjustment Of Guide Display; On/Off Setting And Adjustment Of - Alpine i509-WRA-JK Installation Manual

About the adjustment of guide display

ON/OFF setting and adjustment of

Caution display location

As with the rear camera, the front camera guide display ON/
OFF setting and Caution display location can be adjusted.
See "Guide Display ON/OFF Setting" (page 62) and
"Adjusting the Caution Display Location" (page 63) for the
operations.

Side Camera Operation

Displaying the Side Camera image from the Menu screen
1
Press the (CAM) button.
The Camera view image is displayed.
2
Touch the screen when the image from the
camera is displayed.
The operation screen is displayed on the screen.
3
Touch [Side].
The Side Camera view image is displayed.
• Touch the screen while the camera image is being displayed,
and touch [ ] to return to the previous screen.
• You can perform a Guide Adjustment. For details, see
"Camera Guide Setup" (page 26).
About the adjustment of guide display
ON/OFF setting and adjustment of
Caution display location
As with the rear camera, the side camera guide display ON/
OFF setting and Caution display location can be adjusted.
See "Guide Display ON/OFF Setting" (page 62) and
"Adjusting the Caution Display Location" (page 63) for the
operations.
66
-EN

iDataLink Operation

When the unit is connected to the car's iDataLink module,
you can transfer and receive data between the car and the
unit to check the car's status, or to make various operations
from the unit.
• An iDataLink module (sold separately) is required.
• Available functions differ depending on your vehicle. For
details, refer to your vehicle's instruction manual.
About Audio Interrupt
Audio Interrupt is the function that outputs sound from the
unit when Voice Information (audio reading from the phone
book, etc.)* from the vehicle occurs.
• The Audio Interrupt function of the vehicle differs depending
on the type and grade of the vehicle.
∗ For your safety, when interrupted with Voice Information,
you cannot operate the buttons on the front panel or the
touch buttons on the display, except for some operations.
– The operating restrictions may differ depending on
which mode the unit is in during Voice Information.
– You can use the /
volume of Voice Information.

Access to iDataLink Mode

You can check the car condition, control specific vehicle
functions, etc.
1
Press the (HOME) button to select Vehicle
info. mode.
• The iDataLink mode screen is displayed.
2
Touch the desired tag on the top of the
screen.
Select item:
Climate / Gauges / Park Sensor / Vehicle Info.
• The displayed tag options differ depending on the
type of vehicle.
3
Adjust or confirm the item/information
accordingly.
• Operable functions and displays may differ depending on the
vehicle.
(DOWN/UP) button to control the