1) With the dial in the "ON" position, press the "DELAY/+" button for 3-5s to
start the delay watering function.
2) In Delay Mode, you can find the selection of 24H flashing on the screen.
Press "+" and "-" to select delay time from 24H, 48H and 72H.
3) Press "OK" button to confirm, then the screen will flash between clock and
hours remaining before programmed cycle resumes.
4)To remove rain delay,hold the"DELAY/+"button for 3-5s again to resume
your programmed watering schedule.
When the selection is flashing, if there is no action or operation for 5 sec, the
Delay Mode will be automatically cancelled and back to home page.