Advertisement
3) Use the "+" and "-" button to select watering time, from 1 min to 8 hours.
(The default watering plan is 10 minutes.)
4) Press "OK" button to confirm and start the manual watering.the screen will
flash between clock and hours remaining before programmed cycle resumes.
5) To stop manual watering, turn the dial to OFFand then back to NO, or hold
the "OK/MANUAL" button for 3-5s again to resume your programmed
watering schedule.
Note:
1) When the selection is flashing, if there is no action or operation for 5 sec, the
Manual Mode will be automatically cancelled and back to home page.
2) There may be a slight delay between the time the manual button is pressed
and when watering begins.
Advertisement
