Hood Sensor - HP Compaq dx6050 MT Reference Manual

8.3 Hood Sensor

1. Prepare the computer for disassembly
2. Remove the computer cover
3. Disconnect the hood sensor cable from the system board.
4. Slide the hood sensor switch towards the front of the computer 1 and lower it down through
the slot 2.
To install the hood sensor, reverse the removal procedure.
Service Reference Guide, d300, dx6050
Removal and Replacement Procedures— Desktop (DT) Chassis
(Section 8.1, "Preparation for
(Section 8.5, "Computer
319865-008
Disassembly").
Cover").
8–3