Dimm Sockets - HP Compaq dx6050 MT Reference Manual

Memory
The following processor bus frequencies are required for the system to run at the supported
memory frequencies.
Memory Frequency
266 MHz
333 MHz
400 MHz
If a memory frequency is paired with an unsupported processor bus frequency, the system will
run at the highest supported memory speed. For example, if a 333 MHz DIMM is paired with a
400 MHz processor bus, the system will run at 266 MHz, the highest supported memory speed.
The system will not start if you install unsupported DIMMs.

DIMM Sockets

There are four DIMM sockets on the system board, with two sockets per channel. The sockets are
labeled XMM1, XMM2, XMM3, and XMM4. Sockets XMM1 and XMM2 operate in memory
channel A. Sockets XMM3 and XMM4 operate in memory channel B.
The system board shown below may be different from the one in your computer.
Item
DIMM socket XMM1, Channel A
1
DIMM socket XMM2, Channel A
2
DIMM socket XMM3, Channel B
3
DIMM socket XMM4, Channel B
4
E–2
Required Processor Bus Frequency
400 MHz, 533 MHz, or 800 MHz
533 MHz or 800 MHz
800 MHz
Description
319865-008
Socket Color
Black
Blue
Black
Blue
Service Reference Guide, d300, dx6050