Pci Expansion Card - HP Compaq dx6050 MT Reference Manual

Removal and Replacement Procedures— Slim Tower (ST) Chassis
6. Repeat steps 4 and 5 for any additional modules that you want to install.
The computer automatically recognizes the additional memory when the computer is turned on.
To reassemble the computer, reverse the removal procedure.
If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable
the Smart Cover Sensor.
7.9

PCI Expansion Card

1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock
(Section 7.2, "Unlocking the Smart Cover
2. Prepare the computer for disassembly
1. Remove the computer access panel
2. .Disconnect all cables attached to the expansion cards.
3. If you are installing a card for the first time, go to step 6.
If you are removing an existing card, open the release latch as described in step 6 then go to
step 8.
4. If you are installing an expansion card in a vacant socket, release the expansion card latch 1
that secures the PCI slot covers by pulling the latch up.
5. Remove the slot cover by sliding it up and off 2.
7–12
Lock").
(Section 7.1, "Preparation for
(Section 7.5, "Computer Access
319865-008 Service Reference Guide, d300, dx6050
Disassembly").
Panel").