Front I/O Devices - HP Compaq dx6050 MT Reference Manual

Removal and Replacement Procedures— Slim Tower (ST) Chassis

7.11 Front I/O Devices

1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock
(Section 7.2, "Unlocking the Smart Cover
2. Prepare the computer for disassembly
3. Disconnect the two I/O device cables from the system board: the front USB cable pair and
the front audio cable.
4. Remove the power supply from the chassis
5. From the inside of the chassis, remove the two screws that secure the I/O device to the
chassis 1, then pull the device into the chassis 2 to free it from its mount.
To install the housing assembly, reverse the removal procedures.
7–24
Lock").
(Section 7.1, "Preparation for
(Section 7.19, "Power
319865-008 Service Reference Guide, d300, dx6050
Disassembly").
Supply").