Expansion Cards - HP Compaq dx6050 MT Reference Manual

Removal and Replacement Procedures— Desktop (DT) Chassis
6. Repeat steps 4 and 5 for any additional modules that you want to install.
The computer automatically recognizes the additional memory when the computer is turned on.
To reassemble the computer, reverse the removal procedure.
If you normally lock the Smart Cover Lock, use Computer Setup to relock the lock and enable
the Smart Cover Sensor.

8.9 Expansion Cards

1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock
(Section 8.2, "Unlocking the Smart Cover
2. Prepare the computer for disassembly
3. Remove the computer cover
4. .Remove the computer cover and locate the correct vacant expansion socket on the system
board and the corresponding expansion slot on the back of the computer chassis.
5. Release the slot cover retention bracket by lifting up on the two thumb tabs 1 then rotating
the bracket away from the chassis 2.
8–10
Lock").
(Section 8.1, "Preparation for
(Section 8.5, "Computer
319865-008
Disassembly").
Cover").
Service Reference Guide, d300, dx6050