Removal and Replacement Procedures— Microtower (µT) Chassis
To reassemble the computer, reverse the removal procedure.
6.8 Expansion Cards
6.8.1 Expansion Slot Cover
1. Prepare the computer for disassembly
2. Remove the access panel and rotate the computer so the system board is parallel to the table
to make it easier to work on
3. On the rear of the computer, slide the slot cover lock up to access the expansion slot covers.
For instructions on PCI expansion cards see
For instructions on AGP expansion cards see
6–10
(Section 6.1, "Preparation for
(Section 6.4, "Access
Panel").
Section 6.8.2, "PCI Expansion Card."
Section 6.8.3, "AGP Card."
319865-008
Disassembly").
Service Reference Guide, d300, dx6050