4External 3.5-Inch Drive - HP Compaq dx6050 MT Reference Manual
Business desktop
Hide thumbs
Also See for Compaq dx6050 MT:
- Hardware reference manual (68 pages) ,
- Configuration manual (9 pages) ,
- Quick setup manual (4 pages)
Table of Contents
Advertisement
Removal and Replacement Procedures— Slim Tower (ST) Chassis
7.10.4 External 3.5-inch Drive
1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock
(Section 7.2, "Unlocking the Smart Cover
2. Prepare the computer for disassembly
3. Remove the computer access panel
4. Remove the front bezel
5. Raise the Easy Access drive bay to the upright position.
6. Disconnect the audio, signal, and drive power cables from the drive. The other end of the
cables should remain connected to the system board.
7. Return the Easy Access drive bay to the down position.
8. Push the drive release latch 1 toward the rear of the chassis and hold.
9. Slide the drive 2 toward the front of the drive cage, then lift the drive out of the computer.
7–20
Lock").
(Section 7.1, "Preparation for
(Section 7.5, "Computer Access
(Section 7.6, "Front
Bezel").
319865-008
Disassembly").
Panel").
Service Reference Guide, d300, dx6050
Advertisement
Table of Contents
