Table of Contents
Advertisement
61
SET RT FORM WXYZ
This command enables and sets the REAL TIME output format to WXYZ. Selecting anything but WXYZ
disables the real time output. The WXYZ format can be tested by printing the header with CMD=53.
62
SET PRT MEMO.CR:
This command prints results from memory. A 'YES' entry prints calibration and results, a 'C' entry prints
Calibrations only and a 'R' entry print result only.
63
SET OUTFORM A-H:
This command specifies one of the eight output formats A-H. The outputs can be disabled by specifying
anything but A-H or by using CMD=86,SET RESULT ENABL=NO.
64
PRT RESULT GID:
Each result in memory has a GID (Group Identification) of 16 characters. The GID can be an entered text
(CMD=3) or the date (CMD=122). Enter the GID (Up to 16 characters) and results are printed.
65
READ RESULT DAY:
This command displays the number of results for the entered day number 1-31.
66
COOLER OVERRIDE
The command applies to the CAL3k-S and ST only.
67
PRT CV'S VESSEL:
The Calorific Values (CV) of the specified vessel are printed to the D1 port.
68
READ STABILITY
The entry is a 4-character vessel serial number, printed on the vessel lid. The complete result memory is
searched for this serial number and all results are printed.
69
PRT RESLTS FORM:
Enter the output form descriptor A-H and all results in the memory are printed. The selected (CMD=63)
form remains as specified.
70
HIGH RESOLUTION
The unit can be switched to high display result resolution by a 'YES' entry. The resolution is:
HIGH
LOW
Note that the resolution switch affect the DISPLAY only. All digital outputs depend on output format and
destination. An output to a PC has a resolution of: XX.XXXXX
DDS CALORIMETERS OPERATIONS MANUAL V1.1
1
1
0
0
0
0
0
1
XX.XXXX
XX.XX
2022
CAL3K Advanced Bomb Calorimeters
2
1
Digital Data Systems (Pty) Ltd.
www.ddscalorimeters.com
Website:
www.ddscalorimeters.com
60
Advertisement
Table of Contents
