Table of Contents
Advertisement
This command clears the pressure recordings in the CAL3K-AP. The unit keeps 16 recordings of:
Date and Time
Mass
Temperature Rise
Pressure
Peak pressure time (Milliseconds)
Note that the pressure recordings are triggered by exceeding the 'PRESSURE PEAK LIMIT' CMD=87.
The recordings are in a circular fashion and the oldest one is over-written.
26 READING
This section contains all reading and display operations. Reading refers to retrieving information and
displaying it on the LCD display.
49
READ AMB TEMP.
This causes the display of the present ambient temperature until ESC is pressed.
78
READ ATC TEMP.
Only applicable to CAL3K-AP.
The ATC temperatures (Bottom and Top) are displayed until ESC is pressed.
106
READ BOMB CALI
The number of calibrations (Max=15) per vessel are displayed for each vessel.
47
READ CAL3K MAX
The CAL3K maximum data are displayed.
45
READ CARD ID
The card identification is displayed. The Card ID is used by the factory.
34
READ CHA.FIRINGS
The number of firings in this chassis are displayed.
44
READ DRIFT
The drift (Temperature difference per 6 seconds) is displayed until ESC.
51
READ FIRING VOLT
The actual firing voltage is displayed until ESC is pressed.
DDS CALORIMETERS OPERATIONS MANUAL V1.1
0
0
1
1
0
1
1
1
2022
Digital Data Systems (Pty) Ltd.
CAL3K Advanced Bomb Calorimeters
www.ddscalorimeters.com
Website:
www.ddscalorimeters.com
46
Advertisement
Table of Contents
