Table of Contents
Advertisement
Firing voltage low
If everything is OK it fires the sample and switches to the MAIN cycle
10.4 CYCLE: MAIN
The main (measuring) cycle monitors the vessel temperature and calculates an interim result every 6
seconds 2.5 minutes before the end.
Termination, blocked
Vessel fault
Abort
Miss Fire
CAL3K-AP: Pressure Abort
At the end of the main cycle all variables are saved and the end cycle is started.
10.5 CYCLE: END
CAL3K-AP: Deflate the vessel
Remove vessel
Calibration average check
10.6 CYCLE: COOL
CAL3K-S,ST only:
The vessel is cooled down
10.7 HELP DISPLAY
The messages (any message) is identified by the Mxxx number. The help text can be read out by:
114
READ HELP TEXT
Each fault or operation has a message number attach, the number starting with a 'M' followed by 3
numerical digits. If it is required to read the help text type the command and number.
Example:
114, enter, 524
11 OPERATIONS
11.1 LOADING DEFAULT PARAMETERS
The default parameters are loaded before shipment. It is strongly recommended that the default
parameters are used and are regularly loaded. At power-up the vital parameters are checked during
operation, and if they are out of specification then the DEFAULT PARAMETERS must be loaded.
10
PARA DEFAULT LOAD
DDS CALORIMETERS OPERATIONS MANUAL V1.1
M270
M374
M300
M302
M376, M310
M382
M360, M307, M305, M309
M370
M372
M524, M525, M514
0
0
2022
Digital Data Systems (Pty) Ltd.
CAL3K Advanced Bomb Calorimeters
www.ddscalorimeters.com
Website:
www.ddscalorimeters.com
19
Advertisement
Table of Contents
