DDS Calorimeters CAL3K Series Operation Manual page 63

39 CLEAR RESULTS
This command clears all results. Enter 'YES' to clear the result memory.
The HELP memory is cleared if the text 'HELP' is entered instead of 'YES'.
40 CLEAR CAL3K MAX
This command clears the CAL3K maximum recordings. The recordings consist of:
Maximum Start Temperature and date and time it happened
Maximum Vessel Temperature and date and time
Maximum Ambient temperature and Date and Time
Max Vessel pressure and date and time (For CAL3K-AP only)
Note that the CAL3K Maximums can be printed with CMD=85
41 CLEAR VESSEL MAX
The maximum recordings in the vessel consist of:
Maximum Temperature
Firing count at max Temperature
Date and time of max Temperature
The vessel must be inserted for the clearing.
The command should be repeated with each vessel.
42 CLEAR B_CAL S/N
This command CLEARS all calibrations for the specified vessel Serial Number. The vessel must be
removed from the CAL3K. The deletion is permanent. This command should be used when memory
space is needed for a new vessel. CMD=106 displays all used vessel serial numbers. Once a vessel
calibration is cleared it must be calibrated, See CMD=19.
43 READ TEMP VESSEL
The vessel temperature is displayed until ESC.
44 READ DRIFT
The drift (Temperature difference per 6 seconds) is displayed until ESC.
45 READ CARD ID
The card identification is displayed. The Card ID is used by the factory.
46 READ MAX VESSEL
The vessel maximum data are displayed. The vessel must be in the well.
47 READ CAL3K MAX
The CAL3K maximum data are displayed.
48 READ VESSEL INFO
The information of the inserted vessel is displayed.
DDS CALORIMETERS OPERATIONS MANUAL V1.1
1
1
1
1
1
1
0
0
1
0
2022
Digital Data Systems (Pty) Ltd.
CAL3K Advanced Bomb Calorimeters
www.ddscalorimeters.com
Website: www.ddscalorimeters.com 58