Table of Contents
Advertisement
9
OUTPUT
The CAL3K has a D1 RS232 port which is its connection to the outside world. Some units have a D2
RS232 port and a USB port. These ports are designated as follows:
D1 RS232
D2 RS232
USB
The D1 RS232 port must be setup to match the speed of the connecting port.
54
D1 PORT SPEED
This entry sets the D1 RS232 port speed in baud. The default is 19200baud.
The D1 Port operates with: Parity=none, Data=8, Stop bits=1.
The speed can be set from: 1200 to 115200baud.
The output on the D1 port can be triggered by:
A CAL3K operator (keyboard) initiated
A CAL3K internal initiated
A PC DDS Windows Software App (external)
9.1
OUTPUT PRINTING RESULTS TO PAPER, KEYBOARD INITIATED
An Output appears when one of the PRT... commands are executed. The following command require
that an output format (for an 80-column printer) is specified.
Before printing can commence the printing must be enabled
86
SET RESULT ENABL
This command enables (YES) or disables (NO) the spontaneous printing of results after a determination.
The results are entered in memory and can be printed later by any of the print commands.
63
SET OUTFORM A-H:
This command specifies one of the eight output formats A-H. The outputs can be disabled by specifying
anything but A-H or by using CMD=86,SET RESULT ENABL=NO.
The formats are not set in stone, so it is best to print the HEADER of all formats. The text descriptions
give you are faint idea of what the number columns(data) are.
56
PRT A-H HEADER
The unit has 8 print (Output formats) named A-H. The format can be set by
77
SIMULATE RESULT
DDS CALORIMETERS OPERATIONS MANUAL V1.1
PRINTING
BLUETOOTH
PC APP
0
1
0
0
1
2022
CAL3K Advanced Bomb Calorimeters
(and BLUETOOTH)
Digital Data Systems (Pty) Ltd.
www.ddscalorimeters.com
Website:
www.ddscalorimeters.com
13
Advertisement
Table of Contents
