Do Not Disturb; Time And Date; Headset Memory Mode; Display Contrast - Polycom SoundPoint IP 501 SIP 2.2 User Manual

Do Not Disturb

Press to prevent the phone from
Do Not Disturb
ringing on incoming calls. A lashing icon
and text on the display indicates that Do Not
Disturb is on.
Calls received while Do Not Disturb is
enabled are logged in the Missed Call list.
To turn off Do Not Disturb, press
again.

Time and Date

Time and Date is clearly displayed on the
®
SoundPoint IP 501 SIP phone. If the
phone cannot obtain a time and date from
the server, the display will lash. Contact
your system administrator if either time or
date is incorrect.
You have control over the format of the
display and can turn it off. Select options
which are right for you as follows:

Headset Memory Mode

As an option, the headset can be perma-
nently enabled. This is especially useful
for regular headset users. To do this:
1. Press
Menu
2. Select Settings followed by Basic,
Preferences, Headset Memory.
3. Use the up or down arrows and
Select soft key to enable Headset
Memory Mode.
4. Press
Menu
main menu.

Display Contrast

To adjust the contrast on the display to a
comfortable level:
1. Press Menu
Basic, followed by Contrast.
2. Press the Up or Down soft keys
(or volume keys) to increase or
decrease the display contrast.
Do Not Disturb
.
to return to the
. Select Settings,
(Optional) If multiple lines are in use,
Do Not Disturb can be set on a line-
by-line basis. Contact your system
administrator for further details.
When Do Not Disturb is enabled for
a particular line, this is indicated by a
lashing " X " beside the line indicator
on the display.
1. Press
2. Select Settings followed by Basic,
Preferences, Time & Date.
3. Select from Clock Date, Clock
Time, Clock Order or Enable/Dis-
able.
4. Scroll through the options via the
up and down arrow keys.
5. Press Select to conirm and
to return directly to the idle display.
Subsequent calls to or from this phone
using the headset will activate a lashing
headset icon on the display. Pressing the
line keys or Answer soft key to receive a
call will now connect to the user's headset
automatically.
Repeat steps 1-3 and select Disable to turn
Headset Memory Mode off.
3. Press the Ok or Cancel soft keys to
accept or cancel changes.
4. Press
to return to the idle display.
11
Menu
.
or the Exit soft key
Menu
Menu