Transferring A Call; Call Timer; Ending A Call; Redial - Polycom SoundPoint IP 501 SIP 2.2 User Manual

Transferring a Call

1. During a call, press
Trnsfer soft key (the active call is
placed on hold).
2. Dial the number to which you want
to transfer the call or use the arrow
keys to access speed dial numbers,
missed, placed, and received call
lists. From one of these lists press
the Dial soft key.
3. Press
Transfer
key again or hang up to complete

Call Timer

Call progress on an active call is monitored
through a local call timer. This is visible
within the active call window on the display.

Ending a Call

Press the EndCall soft key.
OR
Replace the handset, or press
Hands-free Mode, or
Mode.

Redial

Press to dial the last call placed
Redial
from your phone.
To redial another previously dialed num-
ber, press from the phone's idle display,
and press again to place the call.
OR
or the
Transfer
or the Trnsfer soft
A blind transfer (without consultation) can also
be supported by pressing the
if in
if in Headset
the transfer. This can be done as
soon as the ringback sound is heard
or you can wait until the third party
answers and talk to them before
completing the transfer. Press the
Split soft key to put the irst call on
hold and keep the second call as the
active call.
Transfer may be cancelled during estab-
lishment by pressing the Cancel soft key.
The original call is resumed.
Blind
soft key.
Press
Conference Directories
Call Lists and Placed Calls to scroll
through the list.
9
or and select
Call Lists