Using Soundpoint Ip 501 Sip; Placing A Call - Polycom SoundPoint IP 501 SIP 2.2 User Manual

Using SoundPoint

Placing a Call

Using the Handset:
1. To obtain dial tone, pick up the handset.
2. Dial the desired number.
Using Hands-Free Speakerphone Mode:
1. With the handset on-hook, press any as-
signed line key,
dial tone.
2. Dial the desired number.
Using the Headset:
1. With the optional headset connected,
press any assigned line key,
NewCall to obtain dial tone.
2. Dial the desired number.
You also have the option to dial directly from the
dial pad without irst getting dial tone. Simply
enter the number then lift the handset, press the
Dial soft key, or press the
In all cases, the active call will appear on the
display showing call duration and destination.
To obtain the IP address of your phone, press
The IP address is listed together with
® IP 501 SIP
, or NewCall to obtain
, or
.
or keys
Menu
6
During a call, you can alternate
between handset, headset, or
hands-free modes by pressing the
or keys, or picking up
the handset.
See also Headset Memory Mode.
followed by Status, Platform
other phone information.
and Phone.