Reset Min/Max Record - Sainlogic FT0300 User Manual

To reacquire the lost signal, press and hold the CH/+ button for 3
seconds to enter the sensor search mode.
The icon AIO will appear in the time area. You can synchronize one or
all of individual sensors. press the [+] or [-] key to toggle between the
following sensors:
AIO. Synchronizes Integrated outdoor transmitter

 CH*. Synchronizes Channel 1-8 Sensors (dependent on which
channel is displayed before entering the Sensor Search Mode).
 ALL. Synchronizes All Sensors.
NOT. Do nothing and exit the Sensor Search Mode.

After selecting one of the above options, press the SET(MODE) key to
resync, and the display will return to normal mode. Do not press any
buttons until the synchronization is complete. The remote search icon
will display constantly for 3 minutes until the signal is reacquired.

7.5 Reset Min/Max record

Note: If you own more than one thermo-hygrometer sensor, the
minimum and maximum value of all channels will be cleared in the reset
mode.
In normal mode, press (do not hold) the MIN/MAX/-key, the MAX icon
will be displayed in date area. Press the SET/MODE key to view max
values of rainfall (rate, 24h, week or month) , pressure (ABS or
REL),outdoor temperature and humidity((AT or dew point),indoor
temperature and humidity (temp or dew point) and sensor temperature
and humidity, sensor dew point or heat index.
Press the MIN/MAX/- key for three seconds to clear all max values. （
the rainfall, wind speed, wind gust, pressure, temperature and humidity
maximum values. The maximum values will now display the current
values）.
Press the CHANNEL/+ button to switch the display between remote
thermo-hygrometer sensors 1 through 8 to view Max values.
23