Sainlogic FT0300 User Manual page 58

Problem
Indoor and
Outdoor
Humidity do not
agree
Display console
contrast is weak
WiFi does not
display on
console.
Allow up to one hour for the sensors to stabilize
due to signal filtering. The indoor and outdoor
humidity sensors should agree within 10 % (the
sensor accuracy is ± 5 %).
Use the calibration feature to match the indoor
and outdoor humidity to a known source.
Replace console batteries with a fresh set of
batteries.
Check your router for problems.
Check WiFi symbol on the display. If
1.
wireless connectivity is successful the
WiFi icon
time field.
2. Make sure your modem WiFi settings
are correct (network name, and
password).
3. Make sure the console is plugged into
AC power. The console will not connect
to WiFi when powered by batteries
only.
4. The console only supports and
connects to 2.4 GHz routers. If you own
a 5 GHz router, and it is a dual band
router, you will need to disable the 5
GHz band, and enable the 2.4 GHz
band.
5. The console does not support guest
networks.
58
Solution
will be displayed in the