Alarm Mode; Alarm Operation - Sainlogic FT0300 User Manual

Note: If plugged into AC power, the time area will display AC ON
and the backlight will remain on. It is not recommended leaving the
backlight on for a long period of time when operating on batteries only,
or the batteries will run down quickly.

8. Alarm Mode

The FT0300 includes the following alarms:
 Time (There are two alarms for time. Alarm 1 and Alarm 2)
 Outdoor Temperature
 Outdoor Humidity
 Outdoor AT(Apparent Temperature)
 Outdoor Dew Point
 Outdoor Feels Like Temperature
 Outdoor Dew Point
 Wind Gust
 Wind Average
 Rate Rainfall
 24 Hour Rainfall
 Absolute Pressure
 Relative Pressure
 Indoor Temperature
 Indoor Humidity
 Indoor Dew Point
 UV Index
 Sunlight
 Sensor(CH1) Temperature
 Sensor(CH1) Humidity
 Sensor(CH1) Heat Index
 Sensor(CH1) Dew Point

8.1 Alarm Operation

When an alarm condition is exceeded, the alarm icon will flash
(visual) and the alarm beeper will sound (audible). To silence the
beeper, press any key.
25