Reset Min/Max Record - Sainlogic FT-0310 User Manual

4. Change Minute. Press the SET(MODE) key again to set the minute. Press the [+] key
or [-] key to adjust the minute up or down.
5. Date Format (default: MM-DD): Press the SET(MODE) key again to enter the
day/month format mode. Press the [+] key to switch between MM-DD, DD-MM.
6. Change Month. Press the SET(MODE) key again to set the calendar month. Press the
[+] key or [-] key to adjust the calendar month.
7. Change Day. Press the SET(MODE) key again to set the calendar day. Press the [+]
key or [-] key to adjust the calendar day.
8. Change Year. Press the SET(MODE) key again to set the calendar year. Press the [+]
key or [-] key to adjust the calendar year.
9. Max/Min Clearing (default: ON). Press the SET(MODE) key again to set the
max/min clearing mode (CLR). The Max/Min can be programmed to clear daily (at
midnight) or manually. Press the [+] key or [-] key to switch between "Clears 24h" and
Clears Manually.
10. Temperature Units of Measure (default: ° C):.Press the SET(MODE) key again to
change the temperature units of measure (the UNITSET icon will be displayed). Press
the [+] key or [-] key to switch between ° F and ° C units of measure.
11. Wind Speed Units of Measure (default: m/s). Press the SET(MODE) key again to
change the wind speed units of measure. Press the [+] key or [-] key to toggle the wind
speed units between m/s, km/h, mph, knots, ft/s or bft.
12. Rainfall Units of Measure (default: mm). Press the SET(MODE) key again to
change the Rainfall units of measure. Press [+] key or [-] key to toggle the rainfall units
between mm and inch.
13. Barometric Pressure Display Units (default: hPa). Press the SET(MODE) key again
to change the pressure units of measure. Press the [+] key or [-] key to toggle the pres-
sure units between mmhg, inHg or hPa.
14. Pressure Threshold Setting (default level 2). Press the SET(MODE) key again to
change the pressure threshold. Press the [+] key or [-] key to change pressure threshold
2 mbar/hour to 4 mbar/hour. (For detailed information of this part please refer to 15.5)
15. Weather Icons Setting (default: partly cloudy). Press the SET(MODE) key again to
change the initial weather icon. Press the [+] key or [-] key to select the initial weather
icon of Sunny, Cloudy, Partly Cloudy or Rainy. (For detailed information of this part
please refer to 15.1 and 15.2)
16. Sunlight Display Units(default: W/㎡). Press the SET(MODE) key again to change
the sunlight units of measure. Press the [+] key or [-] key to toggle the sunlight units
between , W/㎡, fc or lux.
17. Location division.(default: Northern Hemisphere).Press the SET(MODE) key
again to change the location division. Press the [+] key or [-] key to toggle the sunlight
units Northern Hemisphere (NOR)or Southern Hemisphere(SOU). (refer to 5.0 Final In-
stallation of Integrated outdoor transmitter)

7.5 Reset Min/Max record

In normal mode, press (do not hold) the MIN/MAX/-key, the MAX icon will be displayed
in date area. Press the SET/MODE key to view max values of rainfall (rate, 24h, week or
month) , pressure (ABS or REL),outdoor temperature and humidity(AT or dewpoint )and
indoor temperature and humidity (temp or dew point).
14