Sainlogic FT0300 User Manual page 8

1
DOWN DOWN
DOWN DOWN
DOWN
DOWN
UP DOWN
UP DOWN
UP
UP
---
---
4. Insert two AAA batteries.
5. After inserting the batteries, the remote sensor LED indicator
will light for 4 seconds, and then flash once per 60 seconds
thereafter. Each time it flashes, the sensor is transmitting data.
6. Verify the correct channel number (CH) and temperature units
of measure (°F vs. °C) are on the display, as shown in Figure 9.
DIP SWITCH
2 3
DOWN
UP
UP DOWN
UP UP
DOWN
UP
UP DOWN
UP UP
--- ---
--- ---
Table 1
4
---
---
---
---
---
---
---
---
DOWN
UP
8
FUNCTION
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
°F
°C