Chapter Vi Display System; Xy Mode - UNI-T UTD2052CL+ User Manual

Chapter VI Display System

As shown in the figure below, the DISPLAY on the control area is the function button of
Display System.
Press DISPLAY button to enter display setting menu as shown in the table below.
Function Setting
Vector
Types
Dots
Persistance
Menu
Screen
protection time
Next page
Function Setting
Waveform 10%-
brightness 100%
Grid 10%-
brightness 100%
Backlight 10%-
100%
Grid
Previous
Key point:
Display type: The vector will fill the blank between adjacent sampled points. The Dots
only displays sampled points.
Figure 6-1 Function Keys of Display System
Table 6-1 Display Menu (Page 1)
Description
Display sampled points in connection way.
Only display sampled data points.
Set OFF, AUTO, Short persistence, Long Persistence, infinite.
Set 5s, 10s, 20s, manualy.
Set OFF, 1min, 5min, 10min, 30min, 1 hour.
Go to next page
Table 6-2 Display Menu (Page 2)
Description
Set waveform brightness
Set grid brightness
Set backlight brightness
Set full grid, lattice, cross grid, frame
Go to previous page
37
UTD2000 Series User Manual