Tcp/Ip Interface Object (Class Id: F5 Hex - Omron CK3W-GC 00 Series Hardware User Manual

Appendices
 Attribute ID for Output Assembly
Attribute ID
(hex)
03
04
 Attribute ID for Input Assembly
Attribute ID
(hex)
03
04
A-7-3

TCP/IP Interface Object (Class ID: F5 Hex)

The TCP/IP Interface object is intended to configure the TCP/IP interface.
Service Code
Service code
(hex)
01
0E
10
Class ID and Instance ID
The class ID and instance ID are as shown below.
ID type Value (hex)
Class ID F5
Instance ID 01
Attribute ID
The attribute IDs for instances are as shown below.
Attrib-
ute ID Parameter name
(hex)
01 Status
02 Configuration Capability
03 Configuration Control
A-16
Parameter
Description
name
Data Output data
Size Output data size Read
Parameter
Description
name
Data Input data
Size Input data size Read
Parameter name
Get_Attribute_All Reads the values of all attributes.
Get_Attribute_Single Reads the value of the specified attribute. Supported
Set_Attribute_Single Writes the value of the specified attribute. Not supported Supported
Description
IP address setting status of
the interface
Controller configurations
and setup that can be set to
the interface.
Sets the method to used to
set the IP address when
the interface starts.
CK3M-series Programmable Multi-Axis Controller User's Manual Hardware (O036)
Attribute Data type
Read and ARRAY of BYTE 0 to 504 byte data
write
UINT
Attribute Data type
Read and write ARRAY of BYTE 0 to 504 byte data
UINT
Description
Attrib-
Data type
ute
Read DWORD
Read DWORD
Read DWORD
Value (hex)
0 to 1F8
Value (hex)
0 to 1F8
Supported services
Classes Instances
Supported Supported
Supported
Value (hex)
00000001 (al-
ways)
00000000 (al-
ways)
00000000 (al-
ways)