Tcp/Ip Interface Object (Class Id: F5 Hex) - Omron NJ501-1300 User Manual

8 Message Communications
Service Codes
Specify the service to execute with the service code.
Service
Parameter name
code
01 hex Get_Attribute_All
0E hex Get_Attribute_Single
05 hex Reset
Request Paths (IOIs) to Specify Objects
When you specify an object, specify the request path (IOI) for each service code as given below.
Service code
01 hex Get_Attribute_All
0E hex Get_Attribute_Single
05 hex Reset
8-3-3

TCP/IP Interface Object (Class ID: F5 hex)

This object is used to read and write settings such as the IP address, subnet mask, and default gate-
way.
Class ID
Specify F5 hex.
Instance ID
You can specify only 01 hex.
Attribute ID
The attribute ID specifies the information to read.
Class Attribute ID
The class attribute ID specifies the attribute of the entire object.
Attribute ID Parameter name
01 hex Revision
02 hex Max Instance
8-32
Description
Reads the values of the attributes.
Reads the value of the specified attribute.
Resets the built-in EtherNet/IP port. This parameter is used to reset
the built-in EtherNet/IP port when you change the IP address or
other parameter settings and want to apply them. Input one of the
following values for the ServiceDat input variable to the CIPSend
instruction to specify the reset method.
00 hex: Restart the built-in EtherNet/IP port.
01 hex: Clear the tag data link settings and restart.
Class ID Instance ID
01 hex • Specifying a service for a class: 00 hex
• Specifying a service for an instance:
Always 01 hex
Always 01 hex
Description
Revision of the object
The maximum instance number
NJ-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
Classes
Supported.
Supported.
Not sup-
Not required.
• Reading a class attribute: 01 or 02
hex
• Reading an instance attribute: 01 to
07 hex
Not required.
Read data
Attribute
Data
type
Read UINT 0001 hex
Read UINT 0001 hex
Supported services
Instances
Supported.
Supported.
Supported.
ported.
Attribute ID
Value