Eps Connections On The Hp 610 Eps; Recommendations - HP ProCurve J8161A Installation And Getting Started Manual

EPS Connections on the HP 610 EPS

Recommendations

The HP 610 EPS is designed to provide primary or backup PoE power to up
to four HP PoE devices. It can be used to supply primary PoE power to up to
four HP ProCurve Switch xl PoE modules (J8161A), after they have been
installed in an HP ProCurve Switch 5308xl switch chassis. The HP 610 EPS
can also be used to supply backup PoE power to up to four HP Procurve
Switch 2650-PWR or 2626-PWR devices or a mix of primary and backup PoE
power to both types of switch devices. For more information regarding
connectivity, see the HP ProCurve PoE Planning and Implementation Guide.
HP ProCurve
610 EPS
J8169A
Power
Internal Power Status
Fan/Temp Status
Fault
Fan/Temp Status flash = Temperature too high
Fan/Temp Status + Fault flash = Fan failure
EPS cables
Installing and Connecting the HP 600/610 External Power Supplies
EPS Ports Pair A (408 W total for PoE applications)
Device
A1 A2
Connected
EPS A1 EPS A2
Power
Status
EPS Backup Power Ports Status
In Ready Out Ready
Recommended Connection Topologies
HP 610 EPS
EPS Ports Pair B (408 W total for PoE applications)
Device
B1 B2
Connected
EPS B1 EPS B2
Power
Status
EPS Ports: 50 V
8.3 A max per port pair.
HP ProCurve Switch 5308XL
2-19