Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: POWER SUPPLY
Marketing Name / Model
[List multiple models if applicable.]
MODEL: J9405B (HP ProCurve MSM31x and MSM32x PS)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
晶體
EMI shield
Capacitors
Resistor
Socket
Wire
Case
Heat sink
Tape
Tube
Screw
Label
Inductor
Transformer
PCB
EL-MF877-00
Template Revision A
Notes
Epoxy+Alloy+Solder non-recyclable
Aluminum
Non-recyclable
Paste on case
Non recyclable
Quantity
of items
included
in product
14
Page 1
Advertisement
Related Manuals for HP J9405B
Summary of Contents for HP J9405B
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed. Tool Description Tool Size (if applicable) pliers. 3.0 Product Disassembly Process 3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment: 1.