Table of Contents
Advertisement
Installing and Connecting the HP 600/610 External Power Supplies
Recommended Connection Topologies
Recommended Connection Topologies
This section shows you some recommended connection topologies using the
HP 600 RPS/EPS and HP 610 EPS. For more topology information, see the HP
ProCurve web site, http://www.hp.com/go/hpprocurve.
RPS Connections on the HP 600 RPS/EPS
Recommendations
The HP 600 RPS/EPS can provide backup power support for up to six HP
ProCurve switches. In the illustration below, six HP ProCurve Switch 2650-
PWR units are connected to the RPS ports on an HP 600 RPS/EPS.
Lowest priority
connected to port 6
Highest priority
connected to port 1
RPS cables
2-16
RPS
12 V
7.5 A
50 V
16 A
RPS
12 V
7.5 A
50 V
16 A
RPS
12 V
7.5 A
50 V
16 A
RPS
12 V
7.5 A
50 V
16 A
RPS
12 V
7.5 A
50 V
16 A
RPS
12 V
7.5 A
50 V
16 A
Device Connected
R1
R2
R3
RPS 1
RPS 2
RPS 3
RPS 4
Power Status
HP ProCurve Switch 2650-PWR units
Line: 50/60 Hz.
100-240 V~ 7.5 A
Line: 50/60 Hz.
100-240 V~ 7.5 A
Line: 50/60 Hz.
100-240 V~ 7.5 A
Line: 50/60 Hz.
100-240 V~ 7.5 A
Line: 50/60 Hz.
100-240 V~ 7.5 A
Line: 50/60 Hz.
100-240 V~ 7.5 A
Device
R4
R5
R6
E1
E2
Connected
RPS 5
RPS 6
EPS 1
EPS 2
Power
Status
HP 600 RPS/EPS
AC power
Hide quick links:
Advertisement
Table of Contents
