Clock/Drive Control - VIA Technologies P4M890 User Manual

M/b for lga775 conroe & dual core ready intel pentium-d processor
Hide thumbs Also See for P4M890:
Table of Contents

Advertisement

System BIOS Cacheable
Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in
better system performance. However, if any program writes to this memory area, a system
error may result. The settings are: Enabled and Disabled.
Video RAM Cacheable
Select Enabled allows caching of the video BIOS, resulting in better system performance.
However, if any program writes to this memory area, a system error may result. The settings
are: Enabled and Disabled.
Memory Hole
You can reserve this area of system memory for ISA adapter ROM. When this area is
reserved, it cannot be cached. The user information of peripherals that need to use this area of
system memory usually discusses their memory requirements. The settings are: Enabled and
Disabled.
3-6-1 DRAM Clock/Drive Control
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
Current FSB Frequency
Current DRAM Frequency
DRAM Clock
DRAM Timing
IT CMD Support
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
RAS Active Time
This field let's you insert a timing delay between the CAS and RAS strobe signals, used when
DRAM is written to, read from, or refreshed. Fast gives faster performance; and Slow gives
more stable performance. This field applies only when synchronous DRAM is installed in the
system. The settings are: 2T and 3T.
RAS Precharge Time
If an insufficient number of cycles is allowed for the RAS to accumulate its charge before
DRAM refresh, the refresh may be incomplete and the DRAM may fail to retain date. Fast
gives faster performance; and Slow gives more stable performance. This field applies only
when synchronous DRAM is installed in the system. The settings are: 2T and 3T.
CAS Latency
When synchronous DRAM is installed, the number of clock cycles of CAS latency depends
on the DRAM timing. The settings are: 2T and 2.5T.
DRAM Timing Settings
200MHz
266Mhz
By SPD
Auto By SPD
Disabled
F6:Optimized Defaults
35
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vt8237r plus

Table of Contents