Table of Contents
Advertisement
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a keystroke when you hold the key down. The
settings are: 6, 8, 10, 12, 15, 20, 24, and 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before is begins to repeat the keystroke. The
settings are 250, 500, 750, and 1000.
Security Option
This category allows you to limit access to the system and Setup, or just to Setup.
System
Setup (default) The system will boot, but access to Setup will be denied if the correct
OS Select For DRAM > 64MB
Allows OS2 ® to be used with >64MB or DRAM. Settings are Non-OS/2 (default) and OS2.
Set to OS/2 if using more than 64MB and running OS/2 ® .
3-6 Advanced Chipset Features
The Advanced Chipset Features Setup option is used to change the values of the chipset
registers. These registers control most of the system options in the computer.
CMOS Setup Utility – Copyright(C) 1984-2004 Award Software
> Clock/Drive Control
> AGP&P2P Bridge Control
> CPU&PCI Bus Control
Memory Hole
System BIOS Cacheable
Top performance
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Clock/Drive Control
Please refer to section 3-6-1
AGP&P2P Bridge Control
Please refer to section 3-6-2
CPU&PCI Bus Control
Please refer to section 3-6-3
The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt.
password is not entered prompt.
Advanced Chipset Features
Press Enter
Press Enter
Press Enter
Disabled
Enabled
Disabled
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
34
Item Help
F1:General Help
Advertisement
Table of Contents
