Table of Contents
Advertisement
HODEDAH
·
Never open more than one drawer at a time.
·
The use of tip-over restranits may reduce but not eliminate the risk of tip-over.
Let's get started...
Helpful hints, read before beginning assembly
·
Make sure you receive all boxes. If your item is packed in one box, box count will read 1
of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second
box will read 2 of 2.
·
Read each step carefully. It is very important that each step is performed in the correct
order. If these steps are not followed in sequence, assembly difficulties will occur.
·
Work in a spacious level area, preferably carpet, near the place the unit will be used.
· DO NO USE power tools to assemble your furniture, it will strip and damage parts.
·
Your package should include the following hardware and parts. Parts are labeled or
stamped on the raw edge. Please inspect contents to ensure you have received all
components. If you are missing any hardware or parts please contact customer
service right away before assembly.
Assembly Tools Required
Hammer
Product Care and Maintenance
·
Wipe clean with dry soft cloth, never use chemicals or cleaning products they will
damage the finish.
·
Avoid placing your furniture in direct sunlight, as sunlight causes fading.
·
Never push, drag or pull your furniture, to move to a new location carefully with
two or more people carry the unit to its new location.
·
Avoid extreme changes in temperature by arranging furniture away from radiators,
heat and air vents and air conditioning units.
www.Hodedah.com
®
Phillips Screwdriver
Tape Measure
(not supplied)
No Power Tools Needed
Advertisement
Table of Contents
