Audio Configuration; Sata Configuration - DFI CMS631-Q470E User Manual

Advanced
X

Audio Configuration

InsydeH2O Setup Utility
Advanced

SATA Configuration

HD Audio <Enabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
HD Audio
Control the detection of the HD-Audio device
Disabled HDA will be unconditionally disabled
Enabled HDA will be unconditionally enabled
Auto HDA will be enabled if present, disabled otherwise
User's Manual | CMS631
Rev. 5.0
Control Detection of the
HD-Audio device.
Disabled = HDA will be
unconditionally disabled
Enabled = HDA will be
unconditionally enabled.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
Advanced
X
SATA Configuration
InsydeH2O Setup Utility
Advanced
SATA Configuration
SATA Controller(s) <Enabled>
SATA Speed <Auto>
SATA Mode Selection <AHCI>
M.2-M1 Empty
Port <Enabled>
Hot Plug <Disabled>
SATA0(R0) Empty
Port <Enabled>
Hot Plug <Disabled>
SATA1(R1) Empty
Port <Enabled>
Hot Plug <Disabled>
SATA2(R2) Empty
Port <Enabled>
Hot Plug <Disabled>
SATA3(R3) Empty
Port <Enabled>
Hot Plug <Disabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
SATA Controller(s)
Enable or disable the Serial ATA controller. This following fields will only be displayed when this
field is enabled.
SATA Speed
Select Serial ATA controller(s) speed — Auto, Gen1 (1.5 Gbit/s), Gen2 (3 Gbit/s) or Gen 3 (6
Gbit/s).
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI This option allows the Serial ATA controller(s) to use AHCI (Advanced Host Control-
ler Interface).
RAID This option allows the Serial ATA controller(s) to use UEFI, RAID, and Intel Rapid
Storage Technology.
Hot Plug
Enable or disable each Serial ATA port and its hot plug function.
Chapter 3
BIOS SETTINGS
Rev. 5.0
Enable or Disable SATA
Device.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit
X
34