Audio Configuration; Sata Configuration - DFI PIC-Q170/H110 User Manual

PIC-Q170/H110
► Advanced

Audio Configuration

InsydeH2O Setup Utility
Advanced
Audio Configuration
Azalia <Enabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
Azalia
Enable or disable Intel High Definition Audio (HDA), also known as Azalia.
Chapter 3 - BIOS Settings
Rev. 5.0
C o n t r o l D e t e c t i o n o f t h e H D -
Audio device.
Auto = HDA will be enabled if
present, disabled otherwise.
Disabled = HDA will be uncondi-
tionally disabled.
Enabled = HDA will be uncondi-
tionally enabled.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

► Advanced

SATA Configuration

Advanced
SATA Configuration
SATA Controller(s) <Enabled>
SATA Speed <Auto>
SATA Mode Selection <AHCI>
Serial ATA Port 0 [Not Installed]
Port 0 <Enabled>
Hot Plug <Disabled>
Serial ATA Port 1 [Not Installed]
Port 0 <Enabled>
Hot Plug <Disabled>
Serial ATA Port 2 [Not Installed]
Port 0 <Enabled>
Hot Plug <Disabled>
Serial ATA Port 3 [Not Installed]
Port 0 <Enabled>
Hot Plug <Disabled>
Serial ATA Port 4 [Not Installed]
Port 0 <Enabled>
Hot Plug <Disabled>
F1 Help ↑ /↓ Select Item
Esc Exit ←/→ Select Item
SATA Controller(s)
Enable or disable the Serial ATA controller. This following fields will only be displayed when this
field is enabled.
SATA Speed
Select Serial ATA controller(s) speed — Auto, Gen1 (1.5 Gbit/s), Gen2 (3 Gbit/s) or Gen 3 (6
Gbit/s).
SATA Mode Selection
The mode selection determines how the SATA controller(s) operates.
AHCI This option allows the Serial ATA controller(s) to use AHCI (Advanced Host Control-
ler Interface).
RAID This option allows you to create RAID or Intel Matrix Storage configuration on Serial
ATA devices.
SATA Port 0-4/Hot Plug
Enable or disable each Serial ATA port and its hot plug function.
31
www.dfi.com
InsydeH2O Setup Utility
Enable or Disable SATA Device.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Rev. 5.0