Axminster WorkShop AW1950B Original Instructions Manual page 7

Step 3
Step 4
Mounting the Bandsaw to the Stand
10
13
15
1
17
WHEN MOUNTING THE UNIT, WE
STRONGLY ADVISE YOU GET THE
ASSISTANCE OF ANOTHER PERSON
AS THE BANDSAW IS HEAVY.
Lift the saw on to the stand, secure using four long bolts, nuts
and washers (10). Insert the bolts through the pre-drilled holes
in each corner of the base and through the floor stand. Fit the
washers and nuts on the underside and tighten to secure the
assembly.
7
ASSEMBLY
12
Step 5
Step 6