Perkins 1706EA-E93TA Operation And Maintenance Manual page 105

M0087475-06
Illustration 92
1. Note the location of clamp (2). The clamp (2) must
be between the marked location (A).
2. Loosen clamp (2) and remove outer filter (3) from
DEF tank header (1) and discard outer filter (3).
Illustration 93
3. Remove screws (7) and remove retaining plate (6).
4. Remove DEF filter (5) from pickup tube (4) and
discard the used filter (5).
5. Install new filter (5) onto pickup tube (4).
Diesel Exhaust Fluid (Emission Related Component) - Fill
6. Install the retaining plate (6) and install screws (7).
Tighten screws (7) to a torque of 1.1 N·m
(9.8 lb in).
7. Install new outer filter (3) onto DEF tank header
(1). Ensure that the clamp (2) is located between
the location points (A).
8. Tighten clamp (2) to a torque of 4.5 N·m (40 lb in).
9. Install the DEF tank header, refer to Disassembly
and Assembly, Manifold (DEF Heater) - Remove
and Install.
Diesel Exhaust Fluid
(Emission Related
Component) - Fill
g06159487
Refer to the original equipment manufacture
information for the Diesel Exhaust Fluid (DEF) tank
capacity.
Illustration 94
Lockable type DEF Filler cap
g06159580
105
Maintenance Section
i07297213
g03379943